SMOK TFV8 X-Baby review

SMOK TV8 X-Baby

Dubbed the Baby Beast Brother, the TV8 X-Baby is the latest Sub Ohm tank from SMOK. Unlike the previous models SMOK have opted to make the switch to a top airflow design. The tank has a 4ml capacity, fully adjustable and comes with two coils and a replacement glass tube.

We’ve already covered quite a few versions of the Baby Tank so let’s have a good look to see how this one compares!

SMOK TFV8 X-Baby features

  • Stainless Steel Construction.
  • Diameter: 24.5mm.
  • Height: 39mm.
  • Weight: 58.5g.
  • Capacity: 4ml.
  • Top Filling Design.
  • Adjustable Top Airflow.
  • Standard 510 Connector.

What’s in the box?

  • 1x TFV8 X-Baby Tank.
  • 1x Q2 0.4ohm Dual Coil (Pre-Installed).
  • 1x M2 0.25ohm Dual Coil.
  • 1x Replacement Glass Tube.
  • Spare Parts.
  • User Manual.

SMOK TFV8 X-Baby styling and build quality

In my opinion this tank is very well put together and it feels nice and solid. The Stainless Steel construction is of a good standard and the anodized painted finish (we received the metallic red) looks seriously smart. The tank glass is reasonably thick and should an accident occur a replacement tube is included in the box. I felt the thick O-rings were well good and they hold the glass securely. This tank has a diameter of 24.5mm which is a bit of an oddity but I thought it looked great on my Therion 166 and there was no overhang at all.

What is interesting is that even though this tank has a capacity of 4ml the overall height of 39mm is relatively compact. Logos are kept to an absolute minimum with only the manufacturer name “SMOK” displayed in white lettering located on the airflow controller.

The drip tip is of the wide bore variety and made from Delrin. It is a good fit and feels comfortable on the lips when vaping. Keep in mind that you are pretty much stuck with it since it does not feature a standard 510 fitting. I did try my Half Moon Mod drip tips and while they do fit they are sadly far too loose to be used. Lastly the tank features a standard non-adjustable 510 pin.

Focus On www.urvapin.com For Best Vape Tanks.

Airflow

Airflow is very full on with this particular tank so it is ideal for anyone who prefers a direct lung inhale style of vaping. Closing the airflow down results in a restrictive lung inhale. Although you can kind of get away with an extremely loose mouth to lung vape if you heavily close down the airflow it doesn’t really suit that style of vaping in my opinion. This is a cloud chucking tank for those folks who love lots of airflow!

The airflow controller works well, being simple to adjust and it nicely stays in position.

Ease of use

Swapping out the coil is very simple since you only need to unscrew the base. Filling is equally straightforward and uses the trademark SMOK hinged top swing lid system. The filling hole isn’t massive so might present an issue if you still have dropper bottles lying around but there is plenty of room for all new TPD compliant 10ml PET bottles.

How does it vape?

I did initially wonder if the switch to top airflow would lead to some compromise on flavour with this tank but I am happy to report that was not the case. The flavour was really good considering just how airy the draw is and I think most people who like this style of vaping will be very happy with it.

If you live with other people who don’t like a lot of vapour around them then you are probably best avoiding this tank because it will land you in hot water. The TFV8 X-Baby puts out some very thick vapour so things tend to get foggy fast and even closing down the airflow doesn’t make that an enormous difference. Of course if you love clouds then you will really have a lot of fun with this tank but keep in mind it isn’t as ridiculous in terms of sheer cloud potential as the old TFV-4.

Typically I am not normally a fan of extremely airy atomizers but I found if I set the airflow to half open the vape was very enjoyable and since I liked the flavour I was getting I ended up running a few tanks worth of juice through it. I think what I really liked about his product was the fact that it felt very convenient to use. Max VG juice did present a slight problem since the wicking slots in the coil aren’t massive so you can find the vape occasionally borders on a dry hit. Providing you are using 70VG-80VG juice you shouldn’t have any serious issues it just depends on whether you chain vape as much as me.

As you would expect given the airflow the juice does drain extremely quickly so if you’re on a budget be warned. Thankfully this tank is 4ml capacity which does offset the problem slightly and filling is quick and easy thanks to the trademark SMOK hinged top design.

Conclusion

This is a seriously nice tank from SMOK which offers great flavour, excellent airflow and outstanding vapour production. The switch to a top airflow design is a welcome one in my opinion and reduces any chance of leaking.

The only real downside to the TFV8 X-Baby is that it literally devours your juice but that’s the price you really expect to pay with a design like this. Do check this tank out if you like the sound of it!

Many thanks to SMOK who kindly sent this product to Planet of the Vapes for us to review. SMOK have kindly provided us with a brand new TFV8 X-Baby to give away to one lucky winner.

Now It’s Available :SMOK TFV8 X-Baby Top Airflow Tank

Hot Sale Recommendation:

Voopoo Panda

Hellvape Drop Dead RDA

Hellvape Dead Rabbit RTA

Vaporessso Polar Kit

Voopoo Vmate TC 200W Box Mod

Voopoo Vmate 200W Kit With Uforce T1 Tank

Vaporesso Luxe Kit

Vaporesso Luxe Mod

smok novo

dovpo topside

voopoo vfl

voopoo vfl pod

joyetech ultex

vladdin under kit

smoant naboo

vaporise drizzle

 

Aspire Zelos 50W Kit With Nautilus 2 Review

Aspire is well known in the industry of vaping having released a number of successful kits in the past. But many say they are slightly behind in their innovation and their attempt to be one of the best box mod manufacturers available is somewhat behind. But now they are aiming at changing that view with the release of the Aspire Zelo kit, which promises to compete with the most advanced box mods on the market.

Aspire Zelos 50W Kit With Nautilus 2 Review

The Kit

The Aspire Zelos Kit with Nautilus 2 is made of high-quality zinc and aluminum alloy, they have obviously concentrated heavily on the look of this kit as we found it absolutely gorgeous to look at! The Kit is a compact 50W mod aimed at advanced and intermediate users looking for a light and small device for vaping on the go. This ergonomically designed device runs on a 2500mah high-drain built in battery and comes with a host of features such as temperature controls and various vaping effects that allow users to customize their vaping experience.

Available colors of the Zelos Kit

The Zelos Kit comes in standard packaging- a well-shaped device with black, red or grey color scheme as shown above and contains micro-USB upgrade/charging cable, a user manual and other informative leaflets. It might not be the most generous vaping kit, but it’s up there with the rest. It has everything that a vaper may need to have the best vaping experience.

Aspire Zelos Kit in Different Colors

This device measures 23mm X 128mm with a 2ml tank capacity and a 2500mah battary. The slim, elongated design feels very comfortable in hand, especially for people with tiny hands. Once you purchase the Aspire Zelos Kit with Nautilus 2, it will be your go-to device for long hikes and outings. It fits well in small pockets, and it’s so light that you won’t even feel it.

The Aspire Zelos Kit with Nautilus 2 is made of high-quality zinc and aluminum alloy, they have obviously concentrated heavily on the look of this kit as we found it absolutely gorgeous to look at!

 

The Hype

The Aspire Zelos Kit comes with the Nautilus 2 tank which was released slightly before the release of the kit. It has received really good feedback by vapers and a definte improvement to their previuos releases. But to us we thought they are trying to cater for 2 different types of vaper with one tank. That is it comes with 2 different coils, the pre-made 0.7-ohm coil for those sub ohm vapers amongst us and the 1.8 ohms (10-14W) BVC coil head to offer those vapers who still prefer to vape mouth to lung. The Nautilus 2 Tank in 3 colors with their coils  Now although this is good for new vapers, if like most box mod vapers you use sub ohm coils, the 1.8 coil is completely useless, why don’t they just offer an option to have a spare 0.7 coil instead?

Back to the tank; the bottom airflow (adjuster) allow you to control the airflow and as we like a huge flow of air we always have it wide open and were presently surprised with the flow, a real thumbs up from us on this! It has a top-fill design which keeps the tank easy to use and holds 2ml of juice, which is a little low but aimed at conforming with the European regulations…

The variable wattage and voltage settings are pretty easy to work out, we managed it without even looking at the instructions. It also has temperature control but this really is one of those features that a lot of box mods have but only a few use! But it’s nice that it’s there! One additional feature we haven’t seen is the ability to adjust the wattage under its TC mode. All these features coupled with its stylish design makes the Kit a pretty attractive box mod!

Pros

  • It has a solid and ergonomic design making it comfortable to hold in your hand.
  • It has a decent output of 50W and a powerful battery capacity of 2500mah.
  • This device has an automatic display adjustment.
  • It also has an easy top-fill design.
  • Different coil heads offer both mouth to lung and direct lung styles of vaping.
  • Precise airflow control.

Summary

Smart performance, portability and the look of the Zelos are three major factors that make this box mod really good and put Aspire back on the map as one of the leading and best e cig manufacturers. Packing a punch to a max 50W (most vapers vape at around 20-40W), its temperature control functions, and the option to upgrade its firmware makes this device not only versatile but also perfect for long trips away from a power source. Although many complain about the non use of an 18650 battery as experienced vapers have many of these as spares! Well-built from high-quality zinc and aluminum alloy for a sturdy and lightweight mod, the Aspire Zelos Kit with Nautilus 2 is the new sheriff in town.

Now It’s Available :Aspire Zelos 50W 2.0 Kit

Hot Sale Recommendation:

Voopoo Panda

Hellvape Drop Dead RDA

Hellvape Dead Rabbit RTA

Vaporessso Polar Kit

Voopoo Vmate TC 200W Box Mod

Voopoo Vmate 200W Kit With Uforce T1 Tank

Vaporesso Luxe Kit

Vaporesso Luxe Mod

smok novo

dovpo topside

voopoo vfl

voopoo vfl pod

joyetech ultex

vladdin under kit

smoant naboo

vaporise drizzle

HellVape Dead Rabbit RDA Review – This One Excels & Then Some

Is the Dead Rabbit the Ultimate Dripper and Squonking RDA?

We’re a little late to the RDA review party with the Dead Rabbit but it’s certainly been well received by both reviewers and the wider vape community.

Speaking of reviewers this is a project from popular US YouTube reviewer Heathen and manufacturer HellVape best known for the Trishul mech mods and RDA.

Heathen was one of the first YouTube reviewers I subscribed to and he really has gone from strength to strength – always liked his no BS honest reviews.

Anyway the Hellvape Dead Rabbit is a 24mm RDA that includes a squonk pin and comes in a variety of colours each with the option of a funky coloured 810 drip tip.

Incidentally the name Dead Rabbit hails from an Irish/American gang back in the 1850’s– think the movie Gangs of New York and you’ll get my drift.

I’m guessing the bunny ear styled posts on the deck follow this theme through

dead rabbit bunny ears

OK this was sent to me for the purpose of review and as always my thoughts and opinions are my own.

So has the Dead Rabbit RDA made me a very happy vaping bunny or given me a Watership Downer?

Let’s see how this one vapes…

Inside the Box

  • 1 x HellVape Dead Rabbit RDA
  • 1 x 810 colorful resin Drip tip
  • 1 x 510 adapter
  • 1 x Gold BF pin
  • 4 x Hex screws
  • 1 x Orings
  • 2 x Hex screwdrivers

dead rabbit box

Dead Rabbit RDA Specs

  • 24mm rda
  • Slide in top coil deck
  • Adjustable top side diagonal airflow
  • Single or dual coil configurations
  • Gold plated positive post
  • Knurled grip to adjust the airflow with ease
  • Bottom feeding pin included for squonking
  • Two 810 drip tip options and a 510 adapter
  • Slotted or hex head post screw options
  • Protruding 510 pin

Key Features

First up I have to say I absolutely love the raised two tone deck on the Dead Rabbit – especially those post holes.

As I have often mentioned I come unstuck all the time when it comes to trimming my coil legs on post less styles – however the design of this one means I’m a very happy bunny.

You simply drop the coil into the ample sized post holes and thanks to the open slots you can snip without the guesswork – excellent.

post holes dead rabbit

It can take a single or dual coil set-up – I used dual for both dripping and on the VandyVape Pulse BF mod in squonk mode.

Some might say there’s a slight dip in flavour and clouds on a single coil build – however I certainly didn’t notice to much of a change – if at all – on the Rabbit – but hey dual coils are more fun…sometimes

OK I’ve mentioned squonking and trust me of the half dozen or so RDAs I’ve squonked on the Dead Rabbit stands out by a mile – even better than the Digiflavor DROP which I love – more on the squonking action later.

dead rabbit violet

Another great feature and one I hope more companies will adopt – is offering the choice of a coloured drip tip.

That’s a little thing to some but it really does add a little something to the overall look of the RDA – yeah even the red one I got on top of the purple!

It’s a 24mm sitting flush on every single mod I’ve popped it on and doesn’t look lost on the larger ones either.

dead rabbit dripper

And a quick word about the juice well – it’s extremely deep – I think I read somewhere it’s around 5mm which for the drippers out there is great!

It features a top airflow but thanks to the angled cut-outs this acts more like a side airflow and I found little difference in vape quality from having my coils high or low on the deck.

Focus On www.ave40.com For More Vape Tank.

Design and Build Quality

I’ve never used a product from HellVape but if this is a standard of their work then I’m impressed.

The RDA is beautifully machined with the colour coating covering both inside and out and looks like it’s a paint job that will resist all but the hardest knocks.

The top cap is more domed than other drippers I’ve used and I’m guessing this is why this is such a flavoursome RDA!

comical dome top cap

As you can see I received the rather fetching purple version – and even though I’m usually a little annoyed by oversized logos I have to say and even in silver I love the Dead Rabbit image – if it’s not for you I believe blacked out versions are available!

I’ve already mentioned I love the design of the deck and from the side you can see even the post holes carry through the theme of the Rabbit with bunny ear shapes!

Overall it’s well put together – got a great deck and design wise even this grumpy old sod likes the look and logo – so how does it vape?

How Does the Hellvape Dead Rabbit RDA Perform?

I popped in a couple of very simple Clapton coils with a reading of 0.23ohms.

Wicking was easy enough but depending on how high you want your coils be prepared to use a little more cotton than you normally might.

As I’ve already said I found little difference in vape quality how high or low I had my coils – however it’s pretty obvious the closer to your mouthpiece the better the flavour.

In dual coil mode as a dripper I found this to be absolutely zinging the flavour off my tongue with plenty of thick clouds – a real wow moment once that cotton broke it – this thing really is a flavour chaser’s dream.

I can’t get over how smooth the vape is off the Dead Rabbit and even when I pushed my build to 79 watts I was getting a great hit but the vapour stayed smooth – not too warm and those clouds were dense!

Given some RDAs I’ve used in the past have become uncomfortably hot on the lips I was gobsmacked to chain vape on the Rabbit and whilst warming up it certainly didn’t get unbearably hot.

Squonking on the Dead Rabbit

Given I’m more of a squonker than a dripper this was the key for me – does the Dead Rabbit live up to the feedback I’ve seen on how it squonks?

One word – yes!

Oh Lord it’s in squonk mode when this RDA really kicks into life – for me anyway!

dead rabbit perfect squonker

The juice hits underneath the slightly raised peek insulator block meaning it channels the liquid out and to both sides giving both sets of wicks a good soaking.

The depth of the well means it’s rare if impossible to over-squonk and even when the pressure tries to suck the juice back into the bottle there’s still e-liquid left behind – make sure your wicks are on that deck!dead rabbit coil position

The only leakage I’ve got from this is leaving it on its side overnight and not once have I flooded it with overzealous squeezing of my squonker

So as both a dripper and a BF RDA this one excels and then some…

Awesome!

What I Like

I love the ease of build on this clever little deck and the peek insulator block works brilliantly channeling the juice in squonk mode.

I really like the design too – from the photos I thought the knurling on the top cap was a bit over the top but in the flesh it looks good as does the rabbit logo.

It can be used as a single coil however I reckon in dual coil the Rabbit hops into life delivering superb flavour and incredible clouds – don’t get me wrong single coilers will be more than happy.

What I Don’t Like

The O rings on the deck [on mine] to the barrel are a lot looser than I may have liked and two weeks in I feel now they’re lubed up they aren’t as tight as could be.

But hey that’s a nit-pick and they can easily be swapped out.

Another nit-pick is the lack of coils and cotton in the box – most of the newer RDAs out there do supply them – but again a very small moan as most of us have plenty of those to hand.

Final Verdict

Is the Hellvape Dead Rabbit the perfect all round RDA?

I reckon it is.

As I say all the time I’m not much of a dripper but squonking has brought me back to the RDA family and of the ones I’ve tried the Dead Rabbit is as close to the perfect BF RDA I’ve had the pleasure of using.

The squonk action is delightful and that channeling effect is really effective giving your wicks a consistent soaking.

To be honest after using this as a dripper I have spent more time doping that than any of the other newer RDAs in my collection – that says something – the flavour and clouds are exceptional!

Just buy one already!

Now It’s Available :Hellvape Dead Rabbit RDA

Hot Sale Recommendation:

Voopoo Panda

Hellvape Dead Rabbit RTA

Vaporessso Polar Kit

Voopoo Vmate TC 200W Box Mod

Voopoo Vmate 200W Kit With Uforce T1 Tank

Vaporesso Luxe Kit

Vaporesso Luxe Mod

smok novo

dovpo topside

voopoo vfl

voopoo vfl pod

joyetech ultex

vladdin under kit

smoant naboo

vaporise drizzle

 

 

VOOPOO DRAG 157W TC GENE CHIP BOX MOD REVIEW

Full In-depth Review of the VooPoo Drag

VooPoo DRAG 157W TC ModDon’t get hung up on the company’s name. Instead, focus on the product, because it’s worthy of your attention. In this review, we’re going to take a look at the Drag 157W TC box mod from VooPoo (you were warned about the name!). Given its rich set of features and powerful capabilities, we think it’s one of the best vape mods in its class and that you’ll be impressed enough to want to try it out for yourself. So, without further ado, let’s take a look at this new product with our VooPoo DRAG 157W TC Gene Chip Box Mod review.

 

Design

Let’s get the design out of the way up front. This is a relatively small device, powered by two 18650 batteries. It comes in only two color options, silver and black or silver and red. That’s a bit of a disappointment, of course, and I’ll always wonder why more companies don’t opt to give users a wider variety of design choices.

The VooPoo Drag from the topThis is one of the boxier designs to come out in recent years. While other products seem to have standardized the rounded-edge look, the Drag looks and feels like the box mod that it is. This hearkens back to the earlier days of the box mod craze, which gives it kind of a retro feel. And, as nice as high-tech and sporty designs might be, I’ve always appreciated the classics. This has that kind of design.

Focus On www.urvapin.com For More Best Vape mods.

The Mod

You will eventually have to get used to the company name, of course, as it is emblazoned on one side of the chassis, in small letters. It adds another classic touch to the design. The Drag logo is the largest identifier and appears on the battery door in large text. Overall, those logos feel right at home, and their placement does nothing to detract from the aesthetics.

The batteries are kept in place with magnets on the door. As I’ve said elsewhere, this is a feature that we really appreciate, and we hope that it becomes a standard for the industry. Unlike most latches and other door closings, the magnets can offer greater longevity without the wear and tear worries that often arise with inferior designs. Eventually, we suspect that magnets will be the option of choice for pretty much all of the best e cig products, well, where appropriate!Battery compartment on the VooPoo Drag

 

Features

There is also the standard USB port that you need for charging, and solid fire buttons and control buttons to manage device settings. Those settings offer the user flexibility that includes:

  • The ability to control the curve of the device’s wattage
  • The ability to control temperature curve
  • Smart wattage features that allow the Gene Fun chip to manage wattage based on coil resistance changes. That’s a great option to use when you want to protect new coils.
  • Wattage variability. You can get this feature by executing the firmware upgrade.

That chip also provides a host of security features that will protect you by ensuring a timeout when you’ve inhaled a certain amount of time, guard against excessive heat, and prevent overcharging, short-circuit, and other common dangers like those horror stories about vaping explosions which are just ridiculous by the way! These types of protections are often neglected in reviews of products like these, but they’re important features to learn about.

It’s important to note that this device also allows you the option of using a computer interface to customize settings for vaping and temperature curve. Rather than just use preset curves, you can create your own – simply by connecting your device to your computer and using the software provided with the Drag. That’s a really impressive feature, and should be attractive for hobbyists and those enthusiasts who are really selective about vape settings. It only works with Windows operating systems, though.

Overall

We really liked the boxiness of the devices. That’s something that you’ll have to decide for yourself, however it’s not really a mod for those who are looking to quit smoking through vaping, but for those who want to improve their vaping experience. The really important thing is that we were thrilled with all of our test runs with different builds. We managed to get consistent wattage at different temperature settings, and captured huge clouds. At the same time, we maintained flavor and had some of the best group vape sessions we’ve enjoyed in quite some time. Any box mod that can provide our test group with that kind of memorable experienced deserves a bucket of thumb-ups.

Focus On www.urvapin.com For More Latest Vape News.

Now It’s Available :Urvapin Voopoo Brand

Hot Sale Recommendation:

Voopoo Panda

Hellvape Drop Dead RDA

Hellvape Dead Rabbit RTA

Vaporessso Polar Kit

Voopoo Vmate TC 200W Box Mod

Voopoo Vmate 200W Kit With Uforce T1 Tank

Vaporesso Luxe Kit

Vaporesso Luxe Mod

smok novo

dovpo topside

voopoo vfl

voopoo vfl pod

joyetech ultex

vladdin under kit

smoant naboo

vaporise drizzle

VOOPOO VFL Pod System – I have never seen such an AIO

VOOPOO company took a short break for rest and not only. During their absence, they came up with an interesting novelty. By the way, something has recently drawn them to the starting segment, and they started off as aggressively – I mean the drag. Nevertheless, they have already filled their hand in AIO sets, therefore we meet the next starting set. Looking ahead, I will say that this is probably one of the few such devices that I would love to add to my collection. 

VOOPOO VFL Pod System 
VOOPOO VFL Pod System - I have never seen such an AIO ...
Dimensions: 89 x 47 x 18.5mm 
Weight: 71.2g Case 
material: plastic + zinc alloy 
Power supply: built-in 650mAh 
Cartridge capacity: 0.8ml 
Evaporator resistance: 1.2Ω
Output power: up to 10W
Voltage range: 0.5 – 8.5V
Operating mode: POWER (2.5V / 3.0V / 3.5V)
Protection: against low / high resistance, overheating, short circuit, overcharge / overdischarge
Micro USB port charging: yes, charging current 0.5A
Color: see photo below
VOOPOO VFL Pod System - I have never seen such an AIO ...
Package contents
– VFL Pod System mod
– 2pcs replacement cartridge (one is preinstalled)
– USB cable
– user manual
– warranty card
VOOPOO VFL Pod System - I have never seen such an AIO ...
Well, how do you like the exterior? In my opinion, very nothing. Pleasant shapes, repeating the shape of the ball for American football. Dimensions, of course, are not the most compact, but you still do not know what this handsome man can do. 
VOOPOO VFL Pod System - I have never seen such an AIO ...
The color scheme also pleased me – they did not limit themselves to a basic set of colors, but zababahali had juicy, nontrivial options. 
VOOPOO VFL Pod System - I have never seen such an AIO ...
The plastic cap-mouthpiece crowns our hero. And here the buns already begin – there are two openings of different throughput. And as far as I understand, they can be used both individually and together. 
VOOPOO VFL Pod System - I have never seen such an AIO ...
Under the cover is a replaceable cartridge. It is refueled from above, but the capacity, due to the design features of the kit, is small. But don’t worry too much – this was the only “unpleasant moment” in our article.
VOOPOO VFL Pod System - I have never seen such an AIO ...

Focus On www.ave40.com For More Vape Kits.

Built-in evaporator on ceramics, and the shape of the air supply channel resembles the letter “U”, which, according to the developers, makes the taste very pleasant.
VOOPOO VFL Pod System - I have never seen such an AIO ...
VOOPOO VFL Pod System - I have never seen such an AIO ...
Next we go down to the main building. Not only is the device quite ergonomic, it is also functional. So on the control panel there are two buttons and a bunch of LED indicators.
VOOPOO VFL Pod System - I have never seen such an AIO ...
So you can adjust the supplied voltage, and if you and this is not enough, you can adjust the preheating. About how – I do not even remember devices with similar functionality in this segment.
VOOPOO VFL Pod System - I have never seen such an AIO ...
Built-in battery has a pretty decent capacity, but, I confess, I would like more in such a body. A full charge time of just over an hour is quite a decent indicator.
VOOPOO VFL Pod System - I have never seen such an AIO ...
Connector for charging the battery placed on the bottom of the device, and under the rotary cover. So that’s what stole the battery capacity. What can I say, everything was sacrificed to the “cool exterior”.
VOOPOO VFL Pod System - I have never seen such an AIO ...
VOOPOO VFL Pod System - I have never seen such an AIO ...

Focus On www.ave40.com For More Latest Vape News.

Now It’s Available :Voopoo VFL Refillable Pod System Kit 650mah

Hot Sale Recommendation:

Voopoo Panda

Hellvape Drop Dead RDA

Hellvape Dead Rabbit RTA

Vaporessso Polar Kit

Voopoo Vmate TC 200W Box Mod

Voopoo Vmate 200W Kit With Uforce T1 Tank

Vaporesso Luxe Kit

Vaporesso Luxe Mod

smok novo

dovpo topside

voopoo vfl

voopoo vfl pod

joyetech ultex

vladdin under kit

smoant naboo

vaporise drizzle