Smok Mag P3 Kit Preview – Lock And Load?

The Smok Mag P3 Kit is the newest release in the Mag range!mag p3 poster

We have had the amazing Mag Grip, The Mag and the Mag Baby so far!

So what is different about the Mag P3 kit? Hmm quite a lot actually!mag p3 kit components

Let’s have a look at the tank first. Which tank you get in the kit will depend on which kit you buy:

  • TFV16 Tank – Included in all standard kits – for sale outside of TPD regulated areastfv16 poster
  • TFV-Mini V2 Tank – This is for kits for sale in TPD regulated areas to comply with the 2ml maximum capacity.tfv-mini v2

The TFV16 tank has been released for a while but a new coil has just been created. The TFV16 Conical Mesh 0.2ohm coil.tfv16 coils

This apparently uses the Conical Mesh from the OFRF nexMesh coils – I am not sure as yet if it is compatible with the OFRF nexMesh Sub Ohm Tank but it seems to be a similar design.

View more vape devices: https://www.ave40.com/

tfv16 conical mesh coil

You will only get the conical mesh coil in the standard and US edition kits.

If you get the TFV-Mini V2 tank this appears to use the same wonderful coils as used in the TFV8 Baby V2 Tank – found in the Mag Grip Kit and the Stick V9 Max Kit.

Finally moving on to the mod – this looks a right beast – powered by 2×18650 batteries (not included) it will output up to 230W. Sadly no “magazine” style pop in battery compartment.mag p3 battery

There are Variable Wattage, Temperature Control and TCR user modes.mag p3 user modes

To operate the device there is a 1.9in HD touch screen with a keyboard input for entering a passcode to lock the device.mag p3 screen

Oh and having the “Mag” name you can expect the trigger style fire button! Plus it is IP67 Waterproof, Shockproof and Dustproof.mag p3 waterproof

There are 5 colours to choose from: Black / Red, Green / Black, Gray / Black, Red / Black and Blue / Black.
mag p3 colours

Kit Includes

There are two main kit versions. For the EU TPD areas there will be the TPD Kit – for outside the TPD regulated areas there is the standard kit.

TPD Kit

  • Smok Mag P3 Mod
  • TFV-Mini V2 Tank
  • Mini V2 S1 0.15ohm single mesh coil (installed)
  • Mini V2 S2 0.15ohm quad coil
  • Spare parts
  • USB cable
  • User manual

mag p3 tpd version contents

Standard Kit

  • Smok Mag P3 Mod
  • TFV16 Tank
  • Bulb glass protective silicone sleeve
  • TFV16 0.17ohm Mesh Coil (installed) (EU Standard Kit Only)
  • TFV16 Conical Mesh Coil 0.2ohm (installed) (Non EU Standard Kit)
  • TFV16 Dual Mesh 0.12ohm Coil
  • Spare glass
  • USB cable
  • Spare parts
  • User manual

mag p3 standard editions contents

Smok Mag P3 Mod Specs

  • Size: 91.6×72.3x36mm
  • Output: 1-230W (VW) / 10-230W (TC)
  • User modes: VW, Taste Modes (Soft, Norm, Hard), TC (Ti, Ni, SS), TCR
  • Battery: 2×18650 (not included)
  • Display: 1.9inch colour HD touch screen
  • Resistance range: 0.1-2.5ohm (VW) / 0.05-2ohm (TC)
  • Temperature range: 200-600°F / 100-315°C
  • Waterproof (IP67), dustproof, shockproof
  • IQ-M Chipset – 0.001 second fire speed
  • Keyboard input for password protection

mag p3 mod specsSmok TFV16 / Mini V2 Tank Specs

  • Size: 32×64.5mm (standard) / 25.4x54mm (Mini V2)
  • E-liquid capacity: 9ml (standard) / 2ml (Mini V2)
  • Coil: TFV16 Coils (standard) / Mini V2 (Mini V2)
  • Adjustable bottom airflow
  • Locking swing top cap
  • Conical Mesh coil 0.2ohm uses OFRF nexMESH technology (TFV16 only)

mag p3 kit tank specsEven though this kit might be carrying the “Mag” name – thankfully there have been quite a few changes!

View the product here: https://www.ave40.com/smok-mag-p3-vape-starter-kit-230w.html

Vape Wholesale & buy Electronic Cigarettes online in Bulk. Quality Vape Products, Trusted Vape Wholesale Supply by VapeShops Owners.

WHOLESALE INQUIRY: https://www.ave40.com/wholesale-service.html

Leave a Reply

Your email address will not be published. Required fields are marked *