Eleaf iStick Pico 25 85W TC Starter Kit

The Eleaf iStick Pico 25 85W TC Starter Kit is a compact single 18650 (sold separately) powered box mod paired with the Eleaf Ello 25mm Sub-Ohm Tank. The iStick Pico 25 features a three piece body design, a 85W chipset with full TC support, and fits atomizers up to 25mm in diameter. The Ello 25mm Sub-Ohm Tank features an expandable tank section, allowing users to use the compact size for 2ml capacity or the extended size for 4ml capacity; a sliding top fill system; two different drip tips; and uses the HW series coils.

iStick Pico 25 85W TC Features:
1 to 85W Power Output
0.1 to 3.5 ohm Atomizer Resistance Range
Bypass Mode Feature
Firmware Upgradeable
Full Temperature Control Output
Ni200 Nickel Support
Titanium Support
Stainless Steel Support
Three Memory TCR Mode
Set Own Temperature Coefficient of Resistance
Fine Tune Output
0.05 to 1.5 ohm Atomizer Resistance Range
200 to 600 degrees Fahrenheit Range
Ultra Compact Form Factor
48mm by 25mm by 70mm
0.91″ OLED Screen
Battery Life Indicator
Output Wattage/Temperature
Output Amps
Atomizer Resistance
Single 18650 Powered
Top Loaded
Battery Not Included
Micro USB Charge Port
2A Max
Three Button Operation
Oversized Firing Button
Bottom Button Adjustment
Spring Loaded 510 Connection

Product Includes:
One iStick Pico 25 85W TC Box Mod
One Ello Sub-Ohm Tank
One HW1 0.2 ohm Coil
One HW2 0.3 ohm Coil
One 4ml Glass Segment
One Chimney Extension
Micro USB Charging Cable
User Manuals

The iStick Pico 25 85W TC Starter Kit, with its compact and stylish design, convenient retractable top fill Ello 25mm Sub-Ohm Tank, and upgradable firmware, makes this kit a great choice for all vapers. If you want to buy one, you can look for it on urvapin.

Best Seller:
https://www.urvapin.com/
https://www.urvapin.com/limitless-200w-tc-box-mod.html
https://www.urvapin.com/authentic-ijoy-captain-pd270-237w-tc-box-mod.html
https://www.urvapin.com/voopoo-drag-157w-tc-box-mod-resin-version.html
https://www.urvapin.com/arms-race-lmc-200w-dual-18650-box-mod.html

85W iStick Pico 25 box mod

The iStick Pico 25 ingeniously packs a big 0.91-inch screen that offers a concise and clear interface, 2A quick charge capability and upgradeable firmware with preheat function in a compact, stylish yet powerful package. Powered by single 18650 battery, the iStick Pico 25 is capable of outputting a maximum power of 85W and can handle various tanks up to 25mm diameter. The ELLO atomizer that features the HW coil for ultimate flavor and retractable top for easy filling pairs with the iStick Pico 25 perfectly in terms of both appearance and performance.
With a compact size, the iStick Pico 25 with ELLO is very comfortable to hold and carry. Powered by single 18650 battery, it is capable of outputting a maximum power of 85W. The iStick Pico 25 features a big 0.91-inch screen that offers concise and clear interfaces. And there are three switchable interfaces for you to choose the one you’re most accustomed to.

The iStick Pico 25 can handle various tanks up to 25mm diameter. With a maximum charging current of 2A, the battery in the iStick Pico 25 can be fully charged much more quickly. The iStick Pico 25 is powered by a single 18650 battery, allowing to always carry spare batteries with you. Preheat function allows the device to quickly heat up the coil at a higher wattage, providing you with a nice vaping experience. And the firmware is upgradeable to be always the latest. The circuit protection system has both software and hardware battery protections of over-charging, over-current and over-discharging. The 18650 battery can be charged in the iStick Pico 25 through the side USB port via wall adapter or computer or charged with an external battery charger.

Eleaf 85W iStick Pico 25 box mod Features & Spec:
Output wattage: 1-85W
Maximum charging current: 2A
Maximum output current: 50A
Thread type: 510 thread
Battery type: high-rate 18650 battery(Continuous discharge current should be above 25A)
Output mode: VW/Bypass/TC(Ni,Ti,SS,TCR-M1,M2,M3) mode
Resistance range: 0.05-1.5ohm (TC modes), 0.1-3.5ohm (VW mode)
Eleaf 85W iStick Pico 25 box mod Package:
1 * iStick Pico 25 (without battery)
1 * QC USB Cable
1 * User Manuals
Spare Parts

Best Seller:
https://www.urvapin.com/
https://www.urvapin.com/limitless-200w-tc-box-mod.html
https://www.urvapin.com/authentic-ijoy-captain-pd270-237w-tc-box-mod.html
https://www.urvapin.com/voopoo-drag-157w-tc-box-mod-resin-version.html
https://www.urvapin.com/arms-race-lmc-200w-dual-18650-box-mod.html

Eleaf iStick Pico 25 with ELLO Launching

Eleaf is so glad to introduce you an upgraded version of the popular iStick Pico, the iStick Pico 25.

The iStick Pico 25 adopts a big 0.91-inch screen, which offers the users a concise and clear interface, 2A quick charge capability and upgradeable firmware with preheat function in a compact, stylish yet powerful package. Powered by single 18650 battery, the iStick Pico 25 is able to output a maximum power of 85W and can handle various tanks up to 25mm diameter. The ELLO atomizer that features the HW coil for ultimate flavor and retractable top for easy filling pairs with the iStick Pico 25 perfectly in terms of both appearance and performance.

 

Eleaf iStick Pico 25 use new interface for VW mode displays resistance of coil, wattage setting and battery bar more clearly, allowing you to have a check easily by a simple glance.

 

The Smart mode will save one output power setting for each resistance value and can totally save ten groups of such profiles. Once you change the output power setting for a resistance, it will re-save the changed setting automatically. When the Smart mode has already remembered ten profiles and you want to add another new resistance, the first saved profile will be deleted.

 

You can download or make logos to your preference and put the favorite one in the mod. The logo should be single color picture in the format of bmp with limited 96*16 pixel.

 

Steps on how to put logo in the mod:

a.Open the picture you chose with Paint, edit it to be a single color picture of 96*16 pixel, and save it in format of bmp.

b.Download the file on our website, plug the mod in with USB cable, and double click the EleafUpdate.exe.

c.Click “LOGO” and open the picture you saved, finally the custom logo is successfully put in the mod.

d.Press the fire button twice in quick succession when the mod is powered on to enter logo on/off interface and press up or down button one time to turn on or off logo.

e.When you turn on logo and the mod enters standby mode, the logo appears on the screen till the mod goes to sleep mode.

 

 

 

 

Best Seller:
https://www.urvapin.com/
https://www.urvapin.com/limitless-200w-tc-box-mod.html
https://www.urvapin.com/authentic-ijoy-captain-pd270-237w-tc-box-mod.html
https://www.urvapin.com/voopoo-drag-157w-tc-box-mod-resin-version.html
https://www.urvapin.com/arms-race-lmc-200w-dual-18650-box-mod.html