VOOPOO TOO 180W TC BOX MOD Pre Sell at Urvapin

After the success of Drag series and Alpha One, Voopoo released a new beautiful mod with stunning appearance called the Voopoo Too.

Unlike traditional mods on the market the Voopoo TOO is compatible with either single and dual battery. It supports the respective maximum out power of 80W and 180W, depending on your preference. Under the hood the TOO boasts the advanced GENE chip, delivering the fastest fire speed of 0.01 seconds.

Its unique push-pull design of battery door and custom colorful cover, definitely will make this Mod stand out from the crowd.

Moreover, the soft mode ensure you a safe vaping experience at higher wattages. It delivers a smoother flavour, whilst prolongs the performance of your coils.

If you want to find a shining and stable mod with plenty of punch this Voopoo TOO is worth of your try.

Available in a choice of stunning finishes to match your every mood.

VOOPOO TOO 180W TC BOX MOD
VOOPOO TOO 180W TC Box Mod Features:

Dual High-Amp 18650 Batteries – Not Included
Optional Single 18650 Platform
Maximum Wattage Output – Dual 18650: 180W
Maximum Wattage Output – Single 18650: 80W
Output Voltage Range: 5-8.5V
Min Atomizer Resistance: 0.05ohm
Temperature Range: 200-600F
Supports Ni200 Nickel, Titanium, and Stainless Steel Heating Elements
Comprehensive TCR Adjustments
SOFT Mode
Highly Advanced US GENE Fun Chip
CNC Precision Milled
High-Quality Zinc Alloy Construction
Leather Embedded Exterior Battery Cover – Fully Interchangeable
Sharp Lines and Sleek Design
Intuitive 0.91 Inch OLED Display
Oversized Circular Firing Mechanism
Dual Adjustment Buttons
Short Circuit Protection
Over-Temperature Protection
Reverse Polarity Protection
Overtime Protection
Output Over-Current Protection
Overcharge Protection
Over Discharge Protection
Low Battery Warning
MicroUSB Port – Firmware Upgrades
510 Connection
Available in Dazzle, Pitch Dark, Raisin, Turquoise

Related Recommend:
buy electronic cigarette online
smok priv v8 kit
iJoy Elite PS2170 kit
SMOK Mag kit

Geekvape GBOX 200W Squonker Kit Review

Here’s a bit of news to get you all over the midweek hump… Geekvape have released their second squonk mod! First was the Athena squonk mod for single battery, but the improved GBOX Squonk box mod is set to send temperatures through the roof. Check out the new features below and we challenge you to control your excitement!
Geekvape GBOX 200W Squonker Kit
The Gbox has numerous impressive features that will send it to the top of every squonk lovers wish list. So, without further ado let’s check this squonker out!

An electric squonk mod with dual batteries and all the safety features!

The Geekvape GBOX squonk Kit is a stunning, technologically advanced appealing device. The GBOX integrates a squonk-ready system with powerful AS chipset. Your mod will always be up to date and at the top of its game. P.s all you mech-mod-worriers you can take a chill pill and use this mod with peace of mind. It features a real power output of up to 200W with dual batteries. This is unusual as most squonk mods have one battery so the GBOX really will blow your mind compared to some others on the market!

Never fear though, this mod has all the necessary safety precautions to keep you safe. The GBOX will send temperatures soaring but keep them well under control with a full temperature control feature and TCR adjustments.The ergonomic design with a large OLED display will give vapers a comfortable and clear vape every time. The kit combines the powerful GBOX 200W mod with the Radar RDA to provide the ultimate auto-dripping experience for every vaper.

Some extra’s for you!

If all that really wasn’t enough, here are a couple of extra goodies the GBOX also provides. A new and innovative build deck allowing DIY coil builders to build effectively and efficiently. It is compatible with both 810 and 510 drip tips. It has an 8ml e-juice capacity, and supports Ni200, Ti and SS. As well as being available in pearl chrome, army green, wine red and black and red colour options. Ok so we’ve given you all the deets on the GBOX but there’s one more surprise. There is also a new accessory on the market for the GBOX….a flask liquid dispenser!

The 30ml flask is a multi-functional liquid dispenser! This can be used to fill your squonk mods or as a conventional dripping/filling bottle with no leakages. It is made from high-grade stainless steel for durability. It uses a removable soft silicone internal bottle for long-term economical usage. Need we say more, the Geekvape GBOX squonk kit is a must-have for squonk lovers everywhere!

Strong Recommend:
vape wholesale
SMOK TFV12 Prince
SMOK G-Priv 2
Smok ProColor 225w

Joyetech CUBOID PRO Review

Today we are talking about a novelty from the company Joyetech with a variety of functions – the CUBOID Pro Box Mod.

Box mod with a touch screen have long been a rarity in the modern wapping industry. Many companies have tried their hand at manufacturing devices of this class, but such products have not yet caused a proper response from the community. Nevertheless, manufacturers do not learn from their mistakes and continue to produce devices with touch screens, while trying to “cram” as much of the necessary and unnecessary functionality in them. The well-known company Joyetech already has a sad experience with its OCULAR & OCULAR C and CUBOID TAP, but this fact did not prevent it from presenting its new boxmode, which is such a symbiosis between the two above mentioned devices. So, meet, Joyetech CUBOID Pro Box Mod.

Joyetech CUBOID PRO
Joyetech CUBOID Pro is the latest development of the company Joyetech, endowed with all sorts of features that most users will like. In any case, say engineers from Joyetech. Boxmod got a pretty pretty design and a lot of different color solutions.

The device is delivered separately or with a non-serviceable ProCore Aries tank, which we already saw earlier in other boxmodes from Joyetech. Today we will pay attention to fashion.

The CUBOID Pro, by tradition, is made of metal, and the side panels are made of glass by analogy with modern mobile phones. Boxmod in addition to the touch screen, which we’ll talk about below, is equipped with two buttons “fire”, one of which, like a screen, is a touchscreen, and the second is a classic “push”.

The device operates on two 18650 batteries, and the maximum output power, according to the manufacturer, is 200 watts. CUBOID Pro has a board with all the familiar functionality and a lot of different hover modes, including thermal control and all its possible variations. In addition, there is also an integrated vibration monitor, designed to respond to pressing the touch button “fire”.

The main distinguishing feature of this device can rightfully be called a fairly large touch screen with a resolution of 320 * 240 pixels and a diagonal of 2.4 inches. The screen itself is made using TFT technology, which in practice means not very high-quality image. In addition to the standard information related to hovering, this display can also display time, date, as well as wallpaper or “screensavers”. The user can install and modify the latest display options himself, uploading his own pictures to the device.

The screen in Joyetech CUBOID Pro can display both the counter of puffs, and, attention, the number of steps passed. Yes, the company Joyetech built in its box mod pedometer and, apparently, sincerely believes that someone will really use the device for waking up as an aid in fitness.

But the box mod is really good, so it’s a connector and a landing pad for atomizers. In this case, the connector is not quite customary for the company Joyetech way and has a somewhat unusual look. As for the diameter of atomizers, which will look harmonious on this device, everything is quite fine here and you can safely use “atoms” up to 25mm.

Joyetech CUBOID PRO

Specifications Joyetech CUBOID Pro Box Mod:

Dimensions: 56mm * 30mm * 85mm
Display: 2.4 inch TFT / CTP
Screen Resolution: 320 * 240 pixels
Output power: 1-200W
Operating modes: VW / VT (Ni, Ti, SS316) / TCR (M1, M2, M3)
Resistance range: 0.05-1.5Ω (TC modes) /0.1-3.5Ω in VW mode
Temperature range: 100-315 ° C / 200-600 ° F
Operation from two 18650 batteries
Colors: silver, black, red, yellow, blue
Charge up to 2Avape
Maximum output current: 50A
Output voltage: up to 9V

Best Seller:
cheap vape deals
VOOPOO Alpha one
IJOY CAPO 100
SMOK Stick X8 Kit

Brief introduction of Geekvape Aegis

Geekvape recently released one of their first box mods designed by their GM, Justin, Geekvape Aegis. This incredible box mod is dustproof, shockproof and waterproof. It will also appeal to a wide range of vapers because its power output ranges from 5W all the way to 100w.

Geekvape Aegis
This device is a little different compared with other Geekvape devices and atomizers, which is certainly a nice change. It has a solid packaging. On the front of the packaging, you see the Geekvape Aegis and on the back there’s some information. Once you open the packaging, you’re immediately greeted with the device.

In the package there is the Geekvape Aegis mod itself, an 18650 battery adapter, instruction manual, spare silicone film and spare screws. This device does require a single high drain 26650 battery for operation, but you can utilize the 18650 adapter if you prefer to use these type of batteries instead. You should know that the micro USB port for this device is at the top of the vape mod, and it is concealed. Simply unscrew the silicon and you can see the micro USB port for firmware updates.

The Geekvape Aegis is seriously built like a tank, and it is definitely on the heavy side without any battery installed. It is ergonomic and very comfortable to hold. The mixture of silicone, leather and metal does feel great in the hands. All of the edges of this device are smooth as well, which adds even more to the comfort. Even though it is on the heavy side, it will still great to hold.

Geekvape Aegis will accommodate all of your larger atomizers, so all of your large 30mm atomizers will sit flush with no overhang. The battery door is a screwed cap. The threads are beefy and done quite well, so it’s very easy to unscrew and screw the battery cap back into place. There is an o-ring which keeps it completely sealed. On the metal parts of the mod, you’ll see the Geekvape logo and the name of the mod, Aegis. When you press the fire button with your thumb, it naturally rests onto the button in just the right place. The fire and wattage buttons are also nice and clicky.

Overall, Geekvape Aegis is a perfect mod for those looking for something that has class and a bold look, but will also stand the test of time. For more details please go on Urvapin.

Related Recommend:
buy electronic cigarette online
ijoy Genie PD270
Nicomore M1
smoant charon ts 218w

IJOY Genie PD270 box mod

The Genie PD270 is a brand new box mod which follows up the freshest set from IJOY, the captain PD270 mod, packing in a completely unique mod layout, and it has a 234W TC chipset from IWEPAL, powered by means of twin 20700 batteries, the IJOY Genie PD270 box mod capabilities a curved and ergonomic design meant to fit without difficulty inside the consumer’s hand throughout use and RGB backlight on tool make for a unique consumer customization. There are five coloration alternatives for the lighting (pink, blue, inexperienced, white and colorful) and 2 customize RGB coloration settings which can be programmed for one of a kind styles with digital shade separation strategies. Genie PD270 suitable for numerous of atomizers within the market even no overhang with 30mm tanks. What’s more there is a LED flashlight control button at the battery door which helps the tool used as a flashlight. IJOY Genie PD270 box mod is a significantly acclaimed platform for users searching out a cool, magic and tremendous device.
IJOY Genie PD270 box mod
Features & Spec:
Max Wattage: 234W
RGB backlight
Bright and big size screen
Dual 20700 batteries Box Mod
18650 battery fit with adapter
LED flashlight function
Personalized leather stickers
NI/TI/SS temperature control
TCR function
Unique Custom User Mode
Quad Magnetic Back Battery Access Door
Resistance Range: 0.05~3.0 ohm
USB port charging support
Firmware Upgradeable

Package:
1 * IJOY Genie PD270 box mod
2 * 20700 BATTERY
1 * USB Cable
1 * Manual
1 * Warranty Card

The Genie PD270 from Ijoy now is available at Urvapin at best price. For more details of this IJOY Genie PD270 box mod, welcome to check it out on Urvapin. Please feel free to contact us, if there are any question or suggestion

Best Recommend:
cheap vape deals
justfog p16a
asvape michael mod
snowwolf vfeng

Sigelei Compak F1 Kit

The Sigelei Compak F1 Kit is an all-in-one setup features a 40W output, a 2ml tank capacity, LED indicators, e-liquid windows and an integrated battery with fast micro USB charging. This is a small, AIO vape setup that combines a durable zinc alloy chassis with a 2000 mAh battery for a top vaping performance in the lower wattage outputs.

With dimensions of just 28mm x 54.5mm x 90.50mm, this Sigelei Compak F1 Kit can be easily stored in a purse and is pocket friendly. Available colors for this kit include silver/black, red/black, white/black and all black. The chassis is made from zinc alloy and a rubber-oil firing button/grip results in ideal ergonomics. An internal tank has a 2ml e-juice capacity, is easily refilled and its e-liquid level can be monitored via convenient viewing windows. The atomizer/tank are easily removed for replacement and are made with durable materials. There’s also a dust cap stored on the bottom of the kit for cleaning and to ensure maximum hygiene.

An internal battery with a 2000mAh capacity for long vaping times powers the Compak F1. The built-in cell is recharged via a micro USB port that features a quick 2A current to quickly finish the charging process.

The Sigelei Compak F1 Kit works in power mode and has a maximum output of 40 watts, a maximum input voltage of 4.2 volts and fires with a resistance of 0.3ohm. An LED indicator light is used to monitor battery levels and also lights up during mod use.

Sigelei Compak F1 Kit
Features and Specifications
Measurements: 28mm x 54.5mm x 90.50mm
Made from zinc alloy
Rubber oil grip/fire button
Ergonomic and easily transported
Oversized fire button
Colors: white/black, black, red/black, silver/black
Dust cap to keep clean
Easy atomizer/tank replacement
Tank capacity: 2ml
E-liquid viewing windows
LED indicator light
Internal 2000mAh battery
Micro USB fast charging at 2A/5V
Operating modes: power
Power mode output range: 25W to 40W
Input voltage range: 3.2V to 4.2V
Replacement coil included
USB cable included
User manual
Warranty card

Great for on the go use or for the beginner vaper, this small sized, light weight Sigelei Compak F1 Kit is fantastic for traveling! Hurry up! Go on Urvapin to preorder one now!

Best Seller:
buy electronic cigarette online
ijoy Genie PD270
vapemen steam engine
SMOK 220W OSUB King Mod