SMOK Infinix Kit Review

SMOK has been unrestrained in their efforts at entering the pod mod market with the release of 3 different pod mods.

The Rolo Badge, the Fit, and the Infinix. The latter is the device we are looking at today, and I think it might be the pick of the bunch.

It’s powered by a decent internal 250mAH and comes with two refillable pods that have a 2ml capacity.

The Infinix has a familiar smart look to it that should appeal to most vapers and comes in either Blue, Red or Gun Metal.

The SMOK Infinix is powered by a 250mAH internal battery and has a power range between 10 and 16 watts.

As with most pod mods, the battery is activated on inhalation or draw. This means it requires no buttons and is incredibly easy to use.

There are a few safety features with short circuit protection and low voltage protection, and an 8-second cutoff. This means you can only take an 8-second draw, which is a little lower than the usual 10 but I think is fine for this style of vaping.

Specs & Features
SMOK Infinix Kit Specs and Features:

Height: 110mm
Width: 19.5mm
Depth: 11mm
Built-In 250mAh Battery
Power Range: 10W – 16W
Charging via USB
Capacity: 2ml
SMOK Infinix Kit Includes:

1 x Smok Infinix Pod Mod
2 x Smok Infinix Re-fillable Pods
1 x USB Cable
1 x User Manual
1 x E-Liquid Filling Bottle

New Arrival:
Smok V-Fin Kit
Augvape Templar RDA
SMOK MAG BABY KIT

Hotcig RSQ 80W Squonk Box Mod Review

Hotcig has teamed up with Rig Mod to create the RSQ regulated squonk box. However, this is more than just a random collaboration, in fact, on paper, it seems like the perfect marriage.

With Rig Mod playing a part in build quality and design, you know it is going to be a solid device. Then the inclusion of Hotcig’s waterproof (yes waterproof) ‘HM’ chip means the performance should be on point.

So…it’s just another single 18650 regulated squonk box, you might say?

Having used several single battery mechanical squonk boxes, I was expecting the Hotcig RSQ to be a much larger and heavier affair, due to it having a full regulated board.

While the latter part is true as it weighs in at 270g, (compared to the Vandy Vape Pulse’s plastic 170g). However, unbelievably the size of this thing is mind-bogglingly small. It’s 79mm by 48mm by 25mm diminutive frame is actually only a shade taller but on the whole smaller than the Pulse. What??

Even more impressive is how the RSQ can fit up to a 25mm atomizer, but still looks so dinky. This is due to its design that curves out in the center. Which also leads to it being comfortable to hold, so instead of being just an awkward square box….it’s a slightly less awkward, slightly box.

The 510 plate is solid, spring loaded and held in place with two screws; it’s also set back a little from the front of the device, so it sits at the widest part allowing for 25mm atomizers without the whole mod having to be that width – a nice design choice.

The RSQ is constructed from Zinc alloy which gives it a weighty premium feel, but due to its form factor, it doesn’t feel too heavy.

The paintwork is excellent; it’s nice and smooth in the hand, and I’ve not noticed any chips or scratches through constant use.

The internals of the RSQ squonk mod are clean and uncluttered if a little snug. There are battery orientation markings and a little lip on the bottom section, so you can easily remove the battery and squonk bottle (more on the squonk bottle later).

The Hotcig RSQ is a regulated squonk mod with all the battery protection you’d expect.

One of the main reasons vapers might gravitate towards a regulated squonker over a mechanical one is for safety.

You don’t need to be as clued up on Ohms law (although it’s still advisable to know your stuff). You don’t have to worry whether the battery you are using can handle the amps your coil requires.

A regulated mod just takes all the guesswork out of the equation, and the Hotcig RSQ is the perfect squonk mod for the safety conscious and new vapers.

Specs & Features
Rig Mod – Hotcig RSQ 80W Squonk Mod Specs:

Dimensions: 79mm x 48mm x 25mm
Requires 1x 18650 sized battery (not included)
Powered by the HM chip
Output wattage range: 1.0-80.0 watts
Temperature control range: 200°F – 600°F
Temperature control supports the following wire types:
Ni200 Nickel, Titanium, Stainless steel 303, 304, 316 with adjustable initial resistance and adjustable TCR
Bypass firing Mode
0.91″ OLED display
Dual adjustment buttons and an oversized firing button
Magnetic battery door
Spring loaded internal contacts
Micro USB port for firmware updates but can support 1.0 amp charging
7mL Squonk bottle which resides next to an LED light which can be red, blue, green, and “cycle” Mode
Stainless steel threading 510 bottom feeding contact

Rig Mod – Hotcig RSQ 80W Squonk Mod Contents:

1x RSQ Bottom Feed Mod by Rig Mod
1x Silicone bottle
2x Plastic bottle
1x Micro-USB cable
1x User manual
Colors Available: Black, Silver Blue, Red

Urvapin’s Esater Sale is coming,10% off with coupon code:Easter,just cheack the link: https://www.urvapin.com/easter

Strong Recommend:
Smoant S8 Pod Starter Kit
Vaporesso ORCA Solo Kit

Smok Mag Baby Kit Review

SMOK are always releasing new mods or upgrading existing ones, and this time they have taken the ever so popular original SMOK Mag kit and miniaturized it!

It’s a Baby Smok Mag Kit. A tiny mod kit with the newest TFV12 Baby Prince tank sitting on top. It’s still shaped like a gun handle only this time a handle of a mini gun.

There is no room for 2 external 18650 batteries, so the Mag Baby kit has a built-in 1600mAh battery and therefore only capable 50W output in comparison to the original that runs all the way up to 220W.

How much smaller? It measures in at just over 114mm tall with the tank, that’s an incredible 40mm smaller! The mod itself nearly as little as the tank. The tank has the same features as the prince tank… but smaller! It holds a reasonable 4.5ml e-liquid capacity. Coils are the V8 baby Q2 0.6 ohms pre-installed and V8 baby M2 0.25 ohms in the box.

The Smok Mag Baby Kit comes in 9 colors: Black Red, Red Black, Silver Black, Black Prism, Gold Black, Purple Black, Green Black, Navy Blue Black and Pink Black.

Specs & Features

SMOK MAG Baby Mod Specs:

Size: 61.37x46x27mm
Output Power: 1W-50W
Standby Current: <400uA
Output Voltage: 0.5V-9.0V
Resistance Range: 0.1Ω-2.5Ω (VW) / 0.05Ω-2Ω (TC)
Temperature Range: 200℉–600℉/100℃–315℃
TFV12 Baby Prince Tank Specs:

Capacity: 4.5ml
Size: 53.7mm (H) * 26mm (D)
Material: Stainless Steel
Thread: 510

SMOK MAG Baby Kit with TFV12 Baby Prince Tank 50W comes with:

1 x Mag Baby Mod
1 x TFV12 Baby Prince Tank
1 x V8 Baby-Q2 0.6Ω Dual Coils (Pre-installed)
1 x V8 Baby-M2 0.25Ω Dual Coils
1 x Replacement Glass Tube
1 x USB Cable
1 x User Manual
Spare Parts

E-cigarette Brand Recommend:
Aspire Vape
Limitless Vape
Coil Art Vape
Tesla Vape

Z&G Senses Kit

The Z&G, a Swiss brand which is very famous in making high quality E-cigarette products, has released one of their great annual works – Z&G Senses AIO Kit. Swiss workmen’s ingenuity and inventiveness has been melt and integrated into this kit. Safety and reliability are regarded as the most important thing in Swiss workmen’s design principle. It is obviously much better in quality than many other devices in the e-cigarette market. Defects such as liquid or electricity leak or liquid blast have never happened in their products. It is a very safe product!

Parameters:
Brand: Z&G
Weight About 108g
Size: 124mm x 27.5mm x 15mm
Battery capacity: 350 mAh
Product Colors: Hermese orange、Gucci green、cool black
Nicotine volume: 8mg/16mg

Z&G Senses Kit Features and Specs:
Inhalation style: air type direct inhalation
Intake substance: nicotine salt
Charging: USB fast charging style, full charging on 20minutes
Product status: e-pen device & atomizer
Product specification: device 84mm, atomizer 40mm
E-liquid flavors: Virginia tobacco, mixed barriers, coca-cola
Atomization technology: T28 CCELL
High-tech breath LED
mignon, small and convenient to carry

Z&G Senses Kit Package Includes:
1 * E-pen device
2 * E-pen atomizer (1 * 16mg Virginian tobacco, 1 * Mint 8mg),
1 * Instruction for use
1 * USB charger cable

What could not be neglected is that the device is small, exquisite and convenient to carry on. When you are going out, it’s much more convenient to carry on an Z&G Senses Kit than a pack of real cigarettes or a classical bulky E-cigarette device.
Now this Z&G Senses Kit is on sale at Urvapin with a 10% discount. And you can also enjoy a free shipping worldwide! What are you waiting for? Buy one on Urvapin to enjoy right now!

E-cigarette Brand Recommend:
Justfog Vape
Nitecore Vape
FlowerMate Vape
Vo Tech Vape

Wotofo Stentorian Ram Squonk Box Mod

The Wotofo Stentorian Ram Squonk Box Mod is a high-quality squonk mod in the market with a reasonably price. It is powered by single 18650 battery, which is not included. This mechanical box mod is high-quality by making every piece of metal plated with 24k gold. The gold plated metal ensures a high conductivity of the electronics and corrosion resistance. The fire button on the side of the mod is also gold colored and has a security lock. When the device is not in use, you can turn the ring around the button to lock it. The PEEK insulation ring surrounding the spring loaded 510 connection makes overheating not a problem. Through the small window in the battery door you can see the squonk bottle clearly. That makes it compatible with bottom feed atomizer. This bottle can be easily removed. Opening the battery door and unscrewing the PET bottle from the feeder, then you can remove it. The soft and easy-to-press PET bottles makes the Wotofo Stentorian Ram super user friendly.

 Wotofo Stentorian Ram Squonk Box Mod
Parameters and features:
Dimensions: 77 x 47 x 24 mm
Battery: 1x 18650 cell (not included)
Material: Resin/Padauk body
Thread: 510 spring thread
Bottle: 7ml PET Food Grade
Fire button with safe lock to ensure safe vaping experience
One peek with 510 adapter to prevent the top of mod over heating
All metal parts plated 24k gold for better electrical conductivity
510 spring contact pin to support all BF atomizers
24mm 510 thread support all 24mm & 22mm diameter BF atomizers
3pcs PET food grade bottles with 7ml capacity
Noble Padauk or Resin material for mod body
Ribbon for taking out battery easily

Package:
1 * RAM Box Mod
2 * PET Food Grade Bottle
1 * User Manual

This Wotofo Stentorian Ram Squonk Box Mod is for advanced users. Please make sure you have the proper knowledge before purchasing it. You can find more details on Urvapin. Please go and have a look.

New Arrivals:
iJoy X3 324W Kit
SMOK Veneno 225w Kit
Joyetech ATOPACK DOLPHIN
Sigelei GW 257W Kit

Wotofo Flow Sub-ohm Tank

This company is one of the best in vaping when it comes to tanks, they consistently release great atomizers in all styles. I still recommend to this day everyone’s first RDA should come from Wotofo.

What you might realise is this tank is marketed as having a 2ml capacity, However its a 4ml tank with a silicon reducer ring. This ring is pre-installed and limits the tank to 2ml but it is removable! I ofcourse removed this immediately because who doesn’t want an extra 2ml’s and it also looks a lot better when removed.

Now lets talk about the coils, you get 2 x 0.25Ω which have great flavour and longevity. The recommended wattage is between 35w – 60w, I personally found the best wattage at 45 watts. The flavour is comparable to that of the Smok TFV8 coils but in my opinion, better. Cloud production isn’t impressive but this doesn’t both me as i’m more about the flavour and this tank has a bucket load of flavour.

The functionality of the tank is what it most impressive. The top fill cap is very easy to take off with its well designed grooves and smooth threads. The coil size is the exact same as the Smok TFV8 ones and are therefore cross compatible! Lastly the 510 pin is insulated and protrudes alot, not that you would but you could use this on a hybrid mod.

Wotofo Flow Sub-ohm Tank is a direct lung vape but the air flow is slightly restricted. The air flow is fully adjustable and can be completely closed off. All round this is a great vape with the highlight being in the flavour and the easy of use. The only downsides I could find is the drip tip isn’t the most comfortable but as it has a 510 connection you can easily switch it.

My final thoughts are this tank is one of, if not the best flavour sub-ohm tank I have reviewed. It has a tight direct lung air flow with many coil points. It is also in my opinion one of the best looking sub-ohm tanks around at the moment.
Wotofo Flow Sub-ohm Tank
Wotofo Flow Subohm Tank Features & Spec:
Size: 24 x 40mm
Capacity: 4ml/ 2ml (with a silicone plug)
Thread: Silver plated 510 pin Thread
Material: 316 Stainless Steel
510 thread

Lets start with what the ‘Flow’ comes with:
* One Wotofo Flow Sub-Ohm Tank
* Two 0.25 ohm Flow Coils
* Spare O-rings and Glass Section
* Giveaway Card
* User Manual

Best Recommend:
Предложения Vape
vape wholesale
iJoy CAPO SQUONK KIT
smok priv one kit

Vaporesso Revenger Starter Kit

Including the Revenger TC Mod and the NRG Sub-Ohm Tank, the Vaporesso Revenger Starter Kit is a high powered and advanced device. The output power of Revenger Mod can reach up to 220 watts. The Vaporesso Revenger mod is supported by the OMNI Board 2.0. The large 0.96″ OLED display screen on the mod has a detailed interface. The Revenger is powered by two high amp 18650 cells (sold separately) and can be charged through the front micro USB port. The mod features an in-mould labeling case on the aluminum alloy construction which provides greater wear resistance and quality. The all metal tactile fire button gives users a comfortable all day vaping experience.

The OMNI Board 2.0 is a comprehensive board that guarantee a consistently reliable performance with a scientific touch. The OMNI Board provides six output modes: Temperature Control, Smart VW, CCW, CCT, BYPASS, and TCR. It can handle almost any coil that you can throw at it. The CCW function allows you to customize the curve of wattage. You can select the output for every 0.5 second of the first 5 seconds to get maximum pleasure with least ramp up time. CCT function allows you to customize the curve of temperature. It provides a consistent performance when you use temperature control coils.

Vaporesso Revenger Starter Kit
The Vaporesso NRG Sub-Ohm Tank has two versions (5.0ml / 2.0ml). With a variety of quality of life improvements, the tank greatly enhance your vaping experience. The NRG features a convenient slide-n-fill structure which makes refilling simple and easy. The NRG features a unique mesh drip tip to help avoid spit back. The bottom heat insulation layer helps reduce heat. Vaporesso NRG GT Core atomizer heads on the NRG utilizes is designed for variable wattage.

The Vaporesso Revenger Starter Kit is quality, smooth and nicely machined. It is worth to buy. And the kit now is on a discount at Urvapin. Don’t miss it!

Best Seller:
buy electronic cigarette online
ijoy captain pd270
Shanlaan Laan Pod Kit
REV NITRO MOD

SMOK 220W T-Priv box mod

With a max power output up to 220 watts and various firing settings, the Smok T-Priv 220W TC Mod by Smok is here to make an impression. Designed with an eye catching hollowed chassis housing customizable LED lights, the T-Priv makes great use of sharp lines and edgy designs creating a one of a kind menacing look. The LED lights have the option to change into nine different colors, offering a wide spectrum of colors to select from. Crafted to fit ergonomically in the hand from the shape to the placement of the top OLED screen, the fit and finish of the Smok T-Priv has been improved to be durable and to add a comfortable feel. Access to the battery bays are just a slide away from the magnetic battery panel where users may swap out two 18650 batteries (batteries sold separately) on the fly.

You’ve seen the TFV8 original and you’ve seen the TFV8 Baby, now it’s time for something in between. Following the famous TFV4 tank comes the TFV8 Big Baby, now in a smaller package but with the same beastly punch. Based off of the initial design of the TFV4, the TFV8 Big Baby takes all of the features and embraces them tenfold. The upgraded airflow, coil system, tank filling, and tank capacity proves to be just as good as the full size TFV8. Featuring large dual cyclops adjustable airflow, this tank allows you to finely tune the air until you find that sweet spot. The diameter in center chimney has also been enlarged to allow more air to travel through the tank for the least amount of air restriction. While the swivel top fill feature remains generally the same, the fill port size has increased for easier filling and less of a juicy mess. Smok’s famous TF sub ohm tank series is back at it again with top level performance and innovative designs to make it one of the most sought after sub ohm tanks in the market.
SMOK 220W T-Priv box mod

Smok T-Priv 220W Specifications:

Dimensions: 86.6*48.1*32mm
Wattage Range: 6W – 220W
Voltage Range: 0.5V – 9.0V
Temperature Range: 200°F – 600°F / 100°C – 315°C
Resistance Range:
0.1Ω – 3.0Ω (VW Mode)
0.06Ω – 3.0Ω (TC Modes)
Top Mounted OLED Display
LED Cutouts
Aggressive Design
Customizable LED
9-Color Modes
Lateral Fire Key
Ergonomic Styling
Stainless Steel 510 Threads
Spring Loaded 510 Pin
Latched Battery Access Panel
Requires (2) 18650 Batteries (Batteries Sold Separately)
Intelligent Atomizer Recognition
Puff Monitoring system
12 Second Cut Off
Short Circuit Protection
Overheating Protection
Low Battery Warning
TFV8 Big Baby Specifications:
Dimensions: 56*24.5mm
5.0mL Tank Capacity
Stainless Steel Construction
Glass Tank Section
Dual Cyclops Adjustable Airflow
Top Fill System
Wide Bore Delrin Drip Tip
Swivel Action Top Fill
Full Kit Package Contents:

1 x Smok T-Priv 220W Mod
1 x TFV8 Big Baby Beast
1 x V8 Baby-Q2 0.4Ω Dual Coil (Pre-Installed)
1 x V8 Baby-T8 0.15Ω Octuple Coil
1 x Replacement Glass Tube
1 x Micro USB Cable
1 x User Manual
1 x Warranty Card
Spare Parts
Mod Kit Package Contents:

1 x T-Priv 220W Mod
1 x Micro USB Cable
1 x User Manual
1 x Warranty Card

Best Recommend:
cheap vape deals
VOOPOO Alpha one
IJOY CAPO 100
SMOK Stick X8 Kit

New Arrival– UWELL Valyrian Sub Ohm Tank

The Uwell Valyrian Sub Ohm Tank is a high performance sub ohm tank that delivers unrivaled flavor with extremely efficient wicking and enough airflow for any cloud chaser. Featuring three interchangeable airflow pins, users can choose between maximum flavor, airflow, or a combination of both depending on vaping preference. The Valyrian has a 5ml tank capacity and is refilled through its innovative and convenient top fill hinge design which unlocks and opens with the simple press of a button. In addition, the top cap features heat insulation to reduce heat transfer.

The Uwell Valyrian Sub Ohm Tank by Uwell is their largest and greatest product yet. Featuring a standard 5mL tank, the Valyrian is equipped with a heat insulated flip to fill top cap allowing for comfortable use during long periods and quick filling. The new “pin style” coil design allows for custom airflow, flavor, and fast coil replacement on the go.

UWELL Valyrian Sub Ohm Tank
UWELL Valyrian Sub Ohm Tank Features and Specs:
Capacity: 5 mL (8.0 mL glass tube should be purchased separately)
Size: 25 x 62.3 mm
Resistance: 0.15ohm
Connection Threading: 510
Airflow Adjustable: Bottom
Fill Liquid: Top Filling
Material: Stainless Steel, Copper, Pyrex Glass
Kit Contents:

UWELL Valyrian Sub Ohm Tank Package:
1 x VALYRIAN Atomizer
1 x Extra pyrex glass tube 5.0 mL
1 x 0.15ohm (pre-installed)
1 x 0.15ohm
1 x Extra rubber O-rings
1 x Extra drip tip
2 x Extra pins
1 x User’s manual
1 x Drip tip cover

Best Recommend:
buy electronic cigarette online
IJOY CAPO 100 KIT
smok priv v8
vaporesso swag kit

Brief introduction of Geekvape Aegis

Geekvape recently released one of their first box mods designed by their GM, Justin, Geekvape Aegis. This incredible box mod is dustproof, shockproof and waterproof. It will also appeal to a wide range of vapers because its power output ranges from 5W all the way to 100w.

Geekvape Aegis
This device is a little different compared with other Geekvape devices and atomizers, which is certainly a nice change. It has a solid packaging. On the front of the packaging, you see the Geekvape Aegis and on the back there’s some information. Once you open the packaging, you’re immediately greeted with the device.

In the package there is the Geekvape Aegis mod itself, an 18650 battery adapter, instruction manual, spare silicone film and spare screws. This device does require a single high drain 26650 battery for operation, but you can utilize the 18650 adapter if you prefer to use these type of batteries instead. You should know that the micro USB port for this device is at the top of the vape mod, and it is concealed. Simply unscrew the silicon and you can see the micro USB port for firmware updates.

The Geekvape Aegis is seriously built like a tank, and it is definitely on the heavy side without any battery installed. It is ergonomic and very comfortable to hold. The mixture of silicone, leather and metal does feel great in the hands. All of the edges of this device are smooth as well, which adds even more to the comfort. Even though it is on the heavy side, it will still great to hold.

Geekvape Aegis will accommodate all of your larger atomizers, so all of your large 30mm atomizers will sit flush with no overhang. The battery door is a screwed cap. The threads are beefy and done quite well, so it’s very easy to unscrew and screw the battery cap back into place. There is an o-ring which keeps it completely sealed. On the metal parts of the mod, you’ll see the Geekvape logo and the name of the mod, Aegis. When you press the fire button with your thumb, it naturally rests onto the button in just the right place. The fire and wattage buttons are also nice and clicky.

Overall, Geekvape Aegis is a perfect mod for those looking for something that has class and a bold look, but will also stand the test of time. For more details please go on Urvapin.

Related Recommend:
buy electronic cigarette online
ijoy Genie PD270
Nicomore M1
smoant charon ts 218w